Skip to main content

OneTouch Verio Reflect® – Technical Specifications

Published 2024-12-18
Updated 2025-10-03
Products Meter Battery OT Verio Reflect Meter

Technical Specifications:
 

  • Assay method: FAD-GDH (flavin adenine dinucleotide dependent glucose dehydrogenase)
  • Automatic shutoff: Two minutes after last action
  • Battery ratings: Two 3.0 V d.c., (2x CR2032 batteries), image.png15 mA
  • Battery type: 2 replaceable 3.0 Volt CR 2032 lithium batteries (or equivalent)
  • BLUETOOTH® technology
    • Frequency range: 2.4-2.4835 GHz
    • Maximum power: 0.4 mW
    • Operating Range Distance: minimum 26.25 feet (unobstructed)
    • Operating Channels: 40 Channels
    • Security Encryption: 128-bit AES (Advanced Encryption Standard)
  • Calibration: Plasma-equivalent
  • Data port type: Compatible with micro USB 2.0
  • Memory: 750 test results
  • Operating ranges:
    • 43-111°F
    • Relative humidity: Non-condensing 10-90%
    • Altitude: up to 10,000 feet
    • Hematocrit: 20 - 60%
  • Reported result range: 20-600 mg/dL
  • Sample: Fresh capillary whole blood
  • Sample volume: 0.4 µL
  • Size: 1.69(W) x 3.97(L) x 0.61(T) inches
  • Test time: Approximately 5 seconds
  • Unit of measure: mg/dL
  • Weight: Approximately <1.87  ounces
  • Your OneTouch Verio Reflect® Meter result may vary slightly from your actual blood glucose value. This may be due to slight differences in technique and the natural variation in the test technology.

AW 07201105A