Skip to main content

OneTouch Verio Reflect® – Adjusting Range Limits and 90 Day Average Target

Published 2024-12-18
Updated 2025-12-01
Products OT Verio Reflect Meter

Adjusting Range Limits And 90 Day Average Target:
 

  • Note:
    • If you adjust your range limits, your previous Range Indicator icons in the Results Log will not change. Only new results will be affected by your range limit changes.
    • Consult with your healthcare professional about the range limits and 90 Day Average Target that are right for you.

Instructions:

1. From the Settings Menu, press ↑ or ↓ to highlight Range/90d (or Range for Basic Mode) and press OK 
    • Your current meter settings are displayed.

 
2. Highlight the range setting to be adjusted and press OK

3. Adjust the Low Limit and press OK
image.png
  • Repeat this step to change the High Limit. For information about Before and After low and high limits, see article: OneTouch Verio Reflect® – Setting Up Your Meter
  • Note: In Basic Mode, range limits are general and are not defined by mealtime. General range limits are pre-set.

 
4. To adjust the 90 Day Average Target, highlight the 90d Target setting and press OK

5. Adjust the 90 Day Average Target and press OK
 
  • The meter is pre-set with a 90 Day Average Target of 155 mg/dL. The minimum 90 Day Average Target is 99 mg/dL and the maximum is 265 mg/dL.
  • Note: Be sure to talk to your healthcare professional about the 90 Day Average Target that is right for you.

AW 07201105A