Support  OneTouch® Ultra®2 Meter

How do I access the meter memory to review past results and averages in the OneTouch® Ultra®2 Meter?

Reviewing past results and averages stored in the OneTouch® Ultra®2 Meter

If you have just completed a test, press to get to the MAIN MENU screen. If your meter is off, press and hold to turn it on. From the MAIN MENU screen you can choose:

• LAST RESULT to view your most recent result
• ALL RESULTS to review up to 500 of your most recent results four at a time
• RESULT AVG to select 1 of 3 types of result averages

Press ▲ or ▼ to highlight LAST RESULT, ALL RESULTS, or RESULT AVG.

To confirm your selection, press .

Last result

The meter will display your most recent result. This result will include the unit of measure and the date and time of the test. If the result was marked as CONTROL SOLUTION or with either a meal flag or a comment, these notes will be shown as well. Press to return to MAIN MENU. You can also add or change a meal flag or a comment for this result.

All results

The meter will display 4 results at a time, in the order the tests were done, starting with the most recent. For each test result, the meter will display the date and time of the test. Results may also contain the following symbols:

• HI if the result was above 600 mg/dL
• LO if the result was below 20 mg/dL
• * if a comment has been chosen for the result
• C if the result is from a control solution test
• — If the result is flagged BEFORE MEAL
• + if the result is flagged AFTER MEAL

The meter stores a maximum of 500 blood sugar or control solution test results. When the memory is full, the oldest result is dropped as the newest is added.

To view details of an individual result, press ▲ or ▼ to highlight the result you want, then press . You can also add or change a meal flag or a comment for this result. To return to the list of all results from an individual result, press .